Profile settings
The profile settings are used for selecting the operating environment for the
communicator, and for modifying the profile features. One profile is always in use.
Profile in use — Press Change and select the profile you want to use. Press OK.
Profiles — With this setting you can modify the profiles. The available profiles are:
General — The normal profile of the communicator.
Silent — You can set this profile on when you want all the alert tones to
remain silent.
Meeting — You can specify how the communicator operates when you are
in a meeting.
Outdoor — You can specify how the communicator operates when you are
outdoors.
Figure 4
Telephone
66
1999 Nokia Mobile Phones. All Rights Reserved.
Pager — You can set this profile on when you want the communicator to
act as a pager, i.e. the ringing tone sounds only once and received SMS
messages alert.
Flight — Sets on the flight profile, see ”Flight profile” on page 69.
Car — The car profile is set on automatically when the communicator is
connected to a car kit.
Headset — The headset profile is set on automatically when a headset is
connected to the communicator.
Press Rename to change the names of the profiles.
Press Edit to modify the following features of a profile:
All alert tones — You can set the incoming call alert and other alarms to:
Ringing — The normal alert tone is used.
Ascending — The normal alert tone is used, but the volume of the tone
increases gradually.
Ring once — The alert tone sounds only once.
Beep once — A single beep is heard when you receive a call or a message.
Caller groups — The alert tone will only sound when you receive a call from
a member of the selected caller group. See below.
Silent — All the sounds, except the alarm clock, are turned off.
Whatever the chosen setting, an incoming call is always indicated by a note.
Ringing volume — Adjusts the ringing volume: 1 is the lowest, 5 the highest.
Ringing tone — Determines the ringing tone. To compose your own ringing
tones, see ”Composer” on page 141, and to record a ringing tone with the
Digital voice recorder, see ”Voice recorder” on page 144.
Communicator key click — Sets the communicator keyboard sound to Off, Type
1 or Type 2.
Phone key click — Adjusts the phone keypad sound: 1 is the lowest, 3 the
highest, Off turns off the keypad sound.
Divert all voice calls — You can divert all your incoming voice calls to another
phone number. The option Default diverts uses the diverts set in the Network
settings. See below.
Phone lights — The phone display and keypad lights are either permanently on,
or they remain on for the pre-set time period. Available in the car profile only.
Automatic answer — All calls are automatically answered. Available in the car
profile only.
Caller groups — Set one or several contact groups to Yes, and only those calls
that come from people belonging to these groups, alert. All the other sounds
Telephone
67
1999 Nokia Mobile Phones. All Rights Reserved.
are turned off, which also means that you won’t be alerted if you receive an
SMS or a fax from a member of a caller group.