To change the System settings
1 Press Settings in the System main view.
2 Select the setting you want to change.
3 Press Change.
The System settings include all system-related permanent settings:
System sounds — Covers all the sounds in the communicator. The available
settings are:
Default ringing tone — You can select one of the tones in the pop-up box
or compose a special ringing tone for your telephone with the Composer
application. See ”Composer” on page 141. You can also use the sounds you
have recorded with the Digital voice recorder as ringing tones. See ”Voice
recorder” on page 144. If a tone or sound is erased, the default ringing tone
Grande valse will replace it.
Alternate ringing tone — If your SIM card supports the alternate line
service, you can select a different ringing tone for Line 2. See ”Telephone
settings” on page 65.
Note: When one of the PC connectivity applications
or the fax modem is in use, the communicator
consumes more power than normally. To extend the
battery operation time, these applications should be
closed when they are not used.
Sy
st
em
126
1999 Nokia Mobile Phones. All Rights Reserved.
Notification tones: On/Off — Determines whether a sound is heard, for
example, when the memory is too low.
Application tones: Calendar alarm, Clock alarm, Received fax, Received
SMS, Received mail — For each of these items you can set a specific ringing
tone. You would then be able to tell by the tone whether you have received
a fax or a short message, for example.
The None option allows you to turn the selected tone off, with the
exception of the clock alarm. Note that when the phone is turned off, only
calendar and clock alarm ringing tones can be heard. This requires,
however, that the ringing tones are set through the System settings.
Print settings — You can select the default settings for printing. For more
about printing, see ”Document features” on page 34.
Connection type — Select whether to use infrared or cable connection.
Header — Set this on if you want to print your name and the date and time
of printing on the top of each page.
Paper size — Choose either A4 or Letter.
Default printer — Select the printer used in the cable connection.
Baud rate: 9600/19200/57600/115200 — Select the data transmission rate
used in the cable connection.
Flow control: Software/None — You can select whether to let the software
control the data flow.
Data bits: 7/8 — Host-specific communication parameter for the cable
connection.
Parity: None/Odd/Even — Host-specific communication parameter for the
cable connection.
Stop bits: 1/2 — Host-specific communication parameter for the cable
connection.
Backlight period — You can set the time period for which the backlight is
switched on. The available settings are 15/30/45 seconds /1/2/3/4/5 minutes.
The backlight can also be turned off by pressing the
button.
Figure 1
Sy
st
em
127
1999 Nokia Mobile Phones. All Rights Reserved.
Screen blanker period — You can set the time period after which the display
will blank out if the device remains inactive. This feature saves the battery and
increases the operation time of the communicator. The time-out period can be
from 2 to 15 minutes. The screen blanker cannot be turned off.
Contrast control — The contrast view shows a test picture and a set of
commands that can be used to adjust the picture. The + command button
increases the contrast. The – command button decreases the contrast. When
the setting seems satisfactory, press OK.
Preferences — Preferences lets you change date and time formats and the unit
of measurement:
Date format: dd.mm.yy / mm.dd.yy / yy.mm.dd. — For example, 22.03.98 /
03.22.98 / 98.03.22.
Time format: 24 hour / AM/PM — For example, 09:35 / 9:35 AM.
Unit of measure — Choose either Centimetre or Inch as the basic unit of measure.